">

Incremental Encoder (Stock)

Enkoder

Posital Fraba Incremental Encoder UCD-IPT00-XXXXX-HFS0-2RW

Arayüz Programlanabilir Incremental
Pulse Aralığı 1-16348 Ppr
Sinyal Çıkışı Htt-ttl RS422/Push-Pull
Çalışma Gerilimi 4.75-30V DC
Flange Gövde Tipi Blind Hollow
Flange Gövde Çapı 58 mm
Şaft Çapı 15 mm
Koruma Sınıfı IP66/IP67
Şaft Koruma Sınıfı IP65
Bağlantı Çıkışı PVC Kablo, Radial, 2m

 

  • Katagori: Incremental Encoder (Stok)
  • Etiketler: Enkoder
  • Datasheet:
Posital Fraba Incremental Encoder UCD-IPT00-XXXXX-HFS0-2RW
Interface
Interface Programmable Incremental
Programming Functions PPR (1-16384), Output, Counting Direction
Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)
Outputs
Output Driver RS 422 (TTL)
Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage
> V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL) < 0.5 V
Output Voltage High Level RS422 (TTL) > 4 V
Output Voltage Low Level RS422 (TTL) < 0.5 V
Maximum Frequency Response 1 MHz
Maximum Switching Current 50 mA per Channel
Electrical Data
Supply Voltage 4.75 – 30 VDC
Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC
Power Consumption ≤ 1.0 W
Start-Up Time < 1 s
Min. Load Resistance 120 Ω
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 280 years @ 40 °C
Sensor
Technology Magnetic
Accuracy (INL) ±0.0878° (≤ 12 bit)
Duty Cycle 180° ± 27° (Speed > 100RPM)
Phase Angle 90° ± 14° (Speed > 100RPM)
Environmental Specifications
Protection Class (Shaft) IP65
Protection Class (Housing) IP66/IP67
Operating Temperature -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) – +70 °C (+158 °F)
Humidity 98% RH, no condensation
Mechanical Data
Mechanical Data
Housing Material Steel
Housing Coating Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type Blind Hollow, ø 58 mm (H)
Flange Material Aluminum
Shaft Type Blind Hollow, Depth = 28 mm
Shaft Diameter ø 15 mm (0.59″)
Shaft Material Stainless Steel V2A (1.4305, 303)
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 71,2 mm (2.80″)
Weight 720 g (1.59 lb)
Maximum Axial / Radial Misalignment Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Electrical Connection
Connection Orientation Radial
Cable Length 2 m [79″]
Wire Cross Section 0.14 mm² / AWG 26
Material / Type PVC
Cable Diameter 6 mm (0.24 in)
Minimum Bend Radius 46 mm (1.81″) fixed, 61 mm (2.4″) flexing
Certification
Approval CE + cULus listed, Industrial Control Equipment
Product Life Cycle
Product Life Cycle Established
Connection Plan
SIGNAL CABLE COLOR
A Green
/A Yellow
B Gray
/B Pink
Z Blue
/Z Red
Power Supply Brown
GND White
Shielding Shield
Connector-View on Encoder
Pulse Diagram
Rotation Clockwise (seen on shaft)
Dimensional Drawing
drawing-ucd-hfs0-q5b-n.png
drawing-mc-5-cr-432-sws-nnn12b-n-2rw-n.png