">

Absolute Encoder (Stock)

Enkoder

Posital Fraba Absolute SSI Programlanabilir Encoder UCD-S101G-1213-L100-PRL

Arayüz Programlanabilir SSI+Incremental
Single Turn Programlanabilir Max 16 bit
Multi Turn Programlanabilir Max 16 bit
Pulse Aralığı 1- 16348 Ppr
Çalışma Gerilimi 4.75-30V DC
Flange Gövde Tipi Clamp
Flange Gövde Çapı 58 mm
Şaft Çapı 10 mm
Koruma Sınıfı IP66/IP67
Şaft Koruma Sınıfı IP65
Konnektör Tipi M23, Radial, Erkek, 12 pin

 

  • Katagori: Absolute Enkoder (Stok)
  • Etiketler: Enkoder

Posital Fraba Absolute SSI Programlanabilir Encoder UCD-S101G-1213-L100-PRL

Interface SSI with Preset
Manual Functions Preset + complement via cable or connector
Interface Cycle Time ≥ 25 µs
Number of Preset Cycles 5,100,000
SSI Format MMMMMMMMMMMMSSSSSSSSSSSSS0
Video Manual video-link Watch a simple installation video
Programming Functions Absolute: Resolution, Revolution, Code, Preset

ucx_s1_zeroset.jpg

ucx_s1_direction.jpg

Outputs  
Output Driver RS422
Electrical Data  
Supply Voltage 4.5 – 30 VDC
Current Consumption Typical 50 mA
Power Consumption ≤ 1.0 W
Start-Up Time < 1 s
Clock Input RS 422, via Optocoupler
Clock Frequency 100 kHz – 2 MHz
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 350 years @ 40 °C
Sensor  
Technology Magnetic
Resolution Singleturn 13 bit
Resolution Multiturn 12 bit
Multiturn Technology Self powered magnetic pulse counter (no battery, no gear)
Accuracy (INL) ±0.0878° (≤ 12 bit)
Sense Signal (Default) Clockwise shaft movement (front view on shaft)
Code Gray
Environmental Specifications  
Protection Class (Shaft) IP65
Protection Class (Housing) IP66/IP67
Operating Temperature -40 °C (-40 °F) – +85 °C (+185 °F)
Humidity 98% RH, no condensation
Mechanical Data  
Housing Material Steel
Housing Coating Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type Clamp, ø 58 mm (L)
Flange Material Aluminum
Shaft Type Solid, Single Flat, Length = 20 mm
Shaft Diameter ø 10 mm (0.39″)
Shaft Material Stainless Steel V2A (1.4305, 303)
Max. Shaft Load Axial 40 N, Radial 110 N
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N)
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 52,7 mm (2.07″)
Weight 285 g (0.63 lb)
Electrical Connection  
Connection Orientation Radial
Connector M23, Male, 12 pin, CCW / left
Product Life Cycle  
Product Life Cycle Established
Approval CE

Connection Plan  
SIGNAL PIN NUMBER
Power Supply 11
GND 12
Data+ 3
Data- 4
Clock+ 2
Clock- 1
Preset 9
DIR 8
Not Connected 5
Not Connected 6
Not Connected 7
Not Connected 10
Connector-View on Encoder
 
Dimensional Drawing

drawing-mcd-l100-q5b-n.png