">

Absolute Encoder (Stock)

Enkoder

Posital Fraba ProfiBus Absolute Encoder OCD-DPC1B-1412-B150-H3P

Arayüz Profibus DP
Single Turn 12 bit
Multi Turn 14 bit
Çalışma Gerilimi 10-30V DC
Flange Gövde Tipi Blind Hollow
Flange Gövde Çapı 58 mm
Şaft Çapı 15 mm
Koruma Sınıfı IP65
Şaft Koruma Sınıfı IP65
Bağlantı Çıkışı Radial, 3 kablolu konnektör başlığı

 

  • Katagori: Absolute Enkoder (Stok)
  • Etiketler: Enkoder

Posital Fraba ProfiBus Absolute Encoder OCD-DPC1B-1412-B150-H3P

Interface  
Interface Profibus DP
Profile DPV0, DPV1 and DPV2 Class 2 (EN50170 + EN50254)
Diagnostics Memory
Manual Functions Address selector switch 0-99 and terminal resistor (with connection cap)
Features Round Axis
Transmission Rate ≤12 Mbaud
Interface Cycle Time ≥ 1 ms
Programming Functions Resolution, gearing factor (physical resolution) , velocity scaling + filter, preset (zero point), counting direction, limit switches , node number, teach-in, diagnosis
Outputs  
Output Driver Profibus Data Interface, galvanically isolated via opto-couplers
Electrical Data  
Supply Voltage 10 – 30 VDC
Current Consumption ≤ 115 mA @ 10 V DC, ≤ 50 mA @ 30 V DC
Power Consumption ≤ 1.5 W
Start-Up Time < 1 s
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 13.5 years @ 40 °C
Sensor  
Technology Optical
Resolution Singleturn 12 bit
Resolution Multiturn 14 bit
Multiturn Technology Mechanical Gearing (no Battery)
Accuracy (INL) ±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
Code Binary
Environmental Specifications  
Protection Class (Shaft) IP65
Protection Class (Housing) IP65
Operating Temperature -40 °C (-40 °F) – +85 °C (+185 °F)
Storage Temperature -40 °C (-40 °F) – +85 °C (+185 °F)
Humidity 98% RH, no condensation
Mechanical Data  
Connection Cap Material Aluminum
Housing Material Steel
Housing Coating Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type Blind Hollow, ø 58 mm (B)
Flange Material Aluminum
Shaft Type Blind Hollow, Depth = 30 mm
Shaft Diameter ø 15 mm (0.59″)
Shaft Material Stainless Steel V2A (1.4305, 303)
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 99 mm (3.90″)
Weight 460 g (1.01 lb)
Maximum Axial / Radial Misalignment Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Electrical Connection  
Connection Orientation Radial
Connection Type 3 x Cable Gland
Connection Cap Type Removable for easy replacing encoder without new installation of cable, Rotary switches with visible node number, No active components, Terminal resistor switch cut the outgoing bus too, Big spring clips
Product Life Cycle  
Product Life Cycle Established
Approval CE + cULus listed, Industrial Control Equipment

Connection Plan  
SIGNAL PIN NUMBER
Bus line B (Bus in) B
Bus line A (Bus in) A
GND
Power Supply +
Bus line B (Bus out) B
Bus line A (Bus out) A
GND
Power Supply +
Connector-View on Encoder
 
Dimensional Drawing

drawing-ocd-b150-c5y-n.png

drawing-oc-5-tc-430-szm-hccnnn-y-h3p-n.png