">

Absolute Encoder (Stock)

Enkoder

Posital Fraba Profinet Absolute Encoder UCD-EIB1B-1416-HCS0-PAM

Arayüz Profinet
Single Turn 16 bit
Multi Turn 14 bit
Çalışma Gerilimi 10-30V DC
Flange Gövde Tipi Blind Hollow
Flange Gövde Çapı 58 mm
Şaft Çapı 12 mm
Koruma Sınıfı IP66/IP67
Şaft Koruma Sınıfı IP65
Bağlantı Çıkışı Axial, 3 kablolu konnektör başlığı

 

  • Katagori: Absolute Enkoder (Stok)
  • Etiketler: Enkoder

Posital Fraba Profinet Absolute Encoder UCD-EIB1B-1416-HCS0-PAM

Interface  
Interface Profinet
Profile Profidrive Profile 4.x, Encoder Profile 4.x
Diagnostics Memory
Features Boot-Loader, Round Axis, Flashing LEDs
Transmission Rate 10 / 100 Mbit
Interface Cycle Time ≥ 1 ms
Programming Functions Resolution, time base and filter for velocity, preset, counting direction, IP-Address
Outputs  
Output Driver Ethernet
Electrical Data  
Supply Voltage 10 – 30 VDC
Current Consumption ≤ 230 mA @ 10 V DC, ≤ 100 mA @ 24 V DC
Power Consumption ≤ 2.5 W
Start-Up Time < 1 s
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 65 years @ 40 °C
Sensor  
Technology Magnetic
Resolution Singleturn 16 bit
Resolution Multiturn 14 bit
Multiturn Technology Self powered magnetic pulse counter (no battery, no gear)
Accuracy (INL) ±0.0878° (≤ 12 bit)
Code Binary
Environmental Specifications  
Protection Class (Shaft) IP65
Protection Class (Housing) IP66/IP67
Operating Temperature -40 °C (-40 °F) – +70 °C (+158 °F)
Storage Temperature -40 °C (-40 °F) – +85 °C (+185 °F)
Humidity 98% RH, no condensation
Mechanical Data  
Housing Material Steel
Housing Coating Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type Blind Hollow, ø 58 mm (H)
Flange Material Aluminum
Shaft Type Blind Hollow, Depth = 28 mm
Shaft Diameter ø 12 mm (0.47″)
Shaft Material Stainless Steel V2A (1.4305, 303)
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 71,2 mm (2.80″)
Weight 465 g (1.03 lb)
Maximum Axial / Radial Misalignment Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Electrical Connection  
Connection Orientation Axial
Connector 1 M12, Female, 4 pin, d coded
Connector 2 M12, Male, 4 pin, a coded
Connector 3 M12, Female, 4 pin, d coded
Product Life Cycle  
Product Life Cycle Established
Approval CE + cULus listed, Industrial Control Equipment

Connection Plan  
SIGNAL CONNECTOR PIN NUMBER
Tx+ Connector 1 1
Rx+ Connector 1 2
Tx- Connector 1 3
Rx- Connector 1 4
Power Supply Connector 2 1
Not Connected Connector 2 2
GND Connector 2 3
Not Connected Connector 2 4
Tx+ Connector 3 1
Rx+ Connector 3 2
Tx- Connector 3 3
Rx- Connector 3 4
Connector-View on Encoder
 
Dimensional Drawing

drawing-ucd-hcs0-q5b-n.png